Weight Optimal Design of Lateral Wing Upper Covers Made of Composite Materials
Engineering Optimization 2016
Jevgenijs Barkanovs, Edgars Eglītis, Filipe Almeida, M.C. Bowering, G. Watson

The present investigation is devoted to the development of a new optimal design of lateral wing upper covers made of advanced composite materials, with special emphasis on closer conformity of the developed finite element analysis and operational requirements for aircraft wing panels. In the first stage, 24 weight optimization problems based on linear buckling analysis were solved for the laminated composite panels with three types of stiffener, two stiffener pitches and four load levels, taking into account manufacturing, reparability and damage tolerance requirements. In the second stage, a composite panel with the best weight/design performance from the previous study was verified by nonlinear buckling analysis and optimization to investigate the effect of shear and fuel pressure on the performance of stiffened panels, and their behaviour under skin post-buckling. Three rib-bay laminated composite panels with T-, I- and HAT-stiffeners were modelled with ANSYS, NASTRAN and ABAQUS finite element codes to study their buckling behaviour as a function of skin and stiffener lay-ups, stiffener height, stiffener top and root width. Owing to the large dimension of numerical problems to be solved, an optimization methodology was developed employing the method of experimental design and response surface technique. Optimal results obtained in terms of cross-sectional areas were verified successfully using ANSYS and ABAQUS shared-node models and a NASTRAN rigid-linked model, and were used later to estimate the weight of the Advanced Low Cost Aircraft Structures (ALCAS) lateral wing upper cover.


Keywords
weight, optimal design, lateral wing, upper covers, composites
DOI
10.1080/0305215X.2015.1128422
Hyperlink
http://www.tandfonline.com/doi/abs/10.1080/0305215X.2015.1128422

Barkanovs, J., Eglītis, E., Almeida, F., Bowering, M., Watson, G. Weight Optimal Design of Lateral Wing Upper Covers Made of Composite Materials. Engineering Optimization, 2016, Vol.48, Iss.9, pp.1618-1637. ISSN 0305-215X. e-ISSN 1029-0273. Available from: doi:10.1080/0305215X.2015.1128422

Publication language
English (en)
The Scientific Library of the Riga Technical University.
E-mail: uzzinas@rtu.lv; Phone: +371 28399196