Precision Assessment of Surface Coating Roughness Height 3D Parameter St
Diffusion and Defect Data Pt.B: Solid State Phenomena 2013
Māris Kumermanis, Jānis Rudzītis

One of the main surface coating quality indexes of details of mechatronic systems is surface roughness. And the surface roughness is described by surface roughness parameters. Nowadays characterization of surface roughness using three-dimension (3D) methods and parameters become more and more important. This type of surface quality characterization, unlike the two-dimension (2D) methods, provide a more complete view on the surface qualities, since the surface roughness is viewed as a spatial object. Within the last ten years intensive work is being carried out on the development of 3D roughness standards, therefore it is necessary to agree on a unified approach in the assessment of surface roughness 3D parameters. To make possible application of the ISO/DIS 25178 standard being developed one needs information on the determination of 3D surface roughness parameter precision, such as number of measurements, dimensions of measurement areas and their disposition on the measured surface. The present work provides the surface roughness assessment principles when measuring the 3D roughness of coated surfaces by means of contact-type measurement devices, based on the regularities of the theory of probability [3, 4]. The work considers one of the basic parameters of roughness - total height of the surface St. This parameter determines the beginning of contact process. The work determines the number of measurement areas at the chosen probability of parameter precision and credibility. The result is compared with a two-dimension surface model. The experimental testing was carried out on surface coatings obtained by the help of nanotechnologies - at present very important coatings in the machine and apparatuses engineering. The research has resulted in the proposals for the parameter St measurement regulations. © (2013) Trans Tech Publications, Switzerland.

Atslēgas vārdi
3D surface roughness; Theory of probability; TiN coating measurements; Total height of the surface

Kumermanis, M., Rudzītis, J. Precision Assessment of Surface Coating Roughness Height 3D Parameter St. Diffusion and Defect Data Pt.B: Solid State Phenomena, 2013, Vol.199, 155.-158.lpp. ISSN 1012-0394. Pieejams: doi:10.4028/

Publikācijas valoda
English (en)
RTU Zinātniskā bibliotēka.
E-pasts:; Tālr: +371 28399196