Experimental Verification of Design Procedure for Elements from Cross-Laminated Timber

Procedia Engineering 2017
Karīna Buka-Vaivade, Dmitrijs Serdjuks, Vadims Goremikins, Aivars Vilguts, Leonīds Pakrastiņš

Cross-laminated timber is widely used for load-bearing walls and slabs of multi-storey timber buildings as well as for decking structure of pedestrian and road bridges. Design procedure for elements from cross-laminated timber was considered and validated by the experiment and FEM. The design procedure is based on the transformed section method. Eight cross-laminated timber slabs with span equal to 1.8 m were experimentally checked under the action of static load. The difference between the experimentally and analytically obtained results is within the limits from 3.3 up to 20%.

Atslēgas vārdi
Transformed section method;brittle damege; plates in bending
DOI
10.1016/j.proeng.2017.02.142
Hipersaite
http://www.sciencedirect.com/science/article/pii/S1877705817306483

Buka-Vaivade, K., Serdjuks, D., Goremikins, V., Vilguts, A., Pakrastiņš, L. Experimental Verification of Design Procedure for Elements from Cross-Laminated Timber. No: Procedia Engineering, Lietuva, Vilņa, 26.-28. maijs, 2016. Viļna: Elsevier, 2017, 1212.-1219.lpp. ISSN 1877-7058. Pieejams: doi:10.1016/j.proeng.2017.02.142

Publikācijas valoda
English (en)