Research of Laser Cladding of the Powder Materials for Die Repair

Key Engineering Materials 2017
Sergejs Ločs, Irīna Boiko, Viktors Mironovs, Edmunds Tamanis, Oleg Devoyno

The study of laser cladding of powder materials (H13, A11 and M2) onto the tool steel 41Cr4 and C80U was conducted with the aim to establish the influence of overlap ratio, scanning speed and powder feed rate as well as appliance of post-heat treatment on the coating quality and mechanical properties. The highest hardness was achieved for A11 and M2 cladding materials, lowest coefficient of friction – for H13 and M2 coatings. It could be recommended to apply the laser cladding at larger percentage of overlap (50%).

Atslēgas vārdi
tool steel, laser cladding, cladding tracks overlap ratio, heat treatment
DOI
10.4028/www.scientific.net/KEM.721.280
Hipersaite
http://www.scientific.net/KEM.721.280

Ločs, S., Boiko, I., Mironovs, V., Tamanis, E., Devoyno, O. Research of Laser Cladding of the Powder Materials for Die Repair. No: Key Engineering Materials, Latvija, Riga, 3.-4. novembris, 2017. Riga: Trans Tech Publications, Switzerland, 2017, 280.-284.lpp. ISSN 1013-9826. e-ISSN 1662-9795. Pieejams: doi:10.4028/www.scientific.net/KEM.721.280

Publikācijas valoda
English (en)