Metal-Coated Cenospheres Obtained via Magnetron Sputter Coating: A New Precursor for Syntactic Foams
JOM: The Journal of The Minerals, Metals & Materials Society 2018
Andrejs Šiškins, Irina Hussainova, Viktor Kozlov, Mark Lisnanskis, Pierre Leroy, Dirk Lehmhus

Syntactic foams (SFs) and metal matrix syntactic foams (MMSFs) represent an advanced type of metal matrix composites (MMCs) based on hollow microspheres as particulate reinforcement. In general, SF and MMSFs allow tailoring of properties through choice of matrix, reinforcement, and volume fraction of the latter. A further handle for property adjustment is surface modification of the reinforcing particles. The present study introduces cenospheres for use as filler material in SF and MMSFs and as lightweight filler with electromagnetic interference shielding properties in civil engineering, which have been surface coated by means of physical vapor deposition, namely vibration-assisted sputter coating using a magnetron sputtering system. Altogether four types of such cenosphere-based composite powders (CPs) with an original particle size range of 50–125 µm (average particle size d50 75 µm) were studied. Surface films deposited on these were composed of Cu, stainless steel, Ti, and Ti-TiN double layers. For Cu coatings, the deposited metal film thickness was shown to be dependent on the sputtering energy. Scanning electron microscope backscattering images revealed nonporous films uniform in thickness directly after sputtering. Film thickness varied between 0.15 µm and 2.5 µm, depending on coating material and sputtering parameters. From these materials, samples were produced without addition of metal powders, exhibiting metal contents as low as 8–10 wt.% based on the coating alone. Obtained samples had an apparent density of 1.1–1.9 g/cm3 and compressive strengths ranging from 22 MPa to 135 MPa. © 2018, The Minerals, Metals & Materials Society.


Atslēgas vārdi
Metal-Coated Cenospheres, Magnetron Sputter, Coating, Syntactic Foam
DOI
10.1007/s11837-018-2886-0
Hipersaite
https://link.springer.com/article/10.1007%2Fs11837-018-2886-0

Šiškins, A., Hussainova, I., Kozlov, V., Lisnanskis, M., Leroy, P., Lehmhus, D. Metal-Coated Cenospheres Obtained via Magnetron Sputter Coating: A New Precursor for Syntactic Foams. JOM: The Journal of The Minerals, Metals & Materials Society, 2018, Vol. 70, No. 7, 1319.-1325.lpp. ISSN 1047-4838. e-ISSN 1543-1851. Pieejams: doi:10.1007/s11837-018-2886-0

Publikācijas valoda
English (en)
RTU Zinātniskā bibliotēka.
E-pasts: uzzinas@rtu.lv; Tālr: +371 28399196