Comparison of the Efficiency of Three Primary Driers during the Auto-Oxidation of Alkyd and Boiled Linseed Oil
Key Engineering Materials. Vol.903: Riga Technical University 61st International Scientific Conference "Materials Science and Applied Chemistry 2020" (MSAC 2020) 2021
Errj Sansonetti, Dace Cīrule, Bruno Andersons, I. Andersone, Edgars Kuka, M. Danieks, M. Gavars

When using binders in coatings, whose film formation process relays on the oxygen uptake to start the cross-linking reaction, the use of special metal salts, so called driers, can catalyze the process, accelerating the curing of the film and reducing the waiting time between the applications of the next layers of paint. In this work, three primary driers, based on cobalt, iron and manganese are compared, to determine which one is more efficient in drying of alkyd and boiled linseed oil based coating. The study has been done using FTIR spectroscopy to investigate the rate of drying for each drier. The obtained results confirm that using the cobalt drier, the film formation is faster than with the other two alternative driers.


Atslēgas vārdi
Alkyd, Film Formation, FTIR Spectroscopy, Linseed Oil, Primary Drier
DOI
10.4028/www.scientific.net/KEM.903.190
Hipersaite
https://www.scientific.net/KEM.903.190

Sansonetti, E., Cīrule, D., Andersons, B., Andersone, I., Kuka, E., Danieks, M., Gavars, M. Comparison of the Efficiency of Three Primary Driers during the Auto-Oxidation of Alkyd and Boiled Linseed Oil. Key Engineering Materials, 2021, Vol.903, 190.-194.lpp. ISSN 1662-9795. Pieejams: doi:10.4028/www.scientific.net/KEM.903.190

Publikācijas valoda
English (en)
RTU Zinātniskā bibliotēka.
E-pasts: uzzinas@rtu.lv; Tālr: +371 28399196