Methodology for the Static and Total Pressure Sensor Development Based on Elastic Sensing Elements and Linear CCD Matrices
International Review of Mechanical Engineering 2022
Ruslan Borisov, Ivan Antonec, Aleksandr Krotov, Sergey Tarasov, Vjačeslavs Bobrovs

Based on the Airworthiness Standards requirements, accuracy of air pressures measurements is strict. The air flow static and total pressure measurement instrumental errors should not exceed 0.02% and 0.05% of the measurement range with 95% probability. These requirements are ensured by original aerometric pressure sensor based on one-dimensional high sensitivity charge-coupled device considered in this article. Non-contact reception of signal and sensor vacuum durability has significantly increased the efficiency of measurement processes. The algorithm for calculating elastic sensitive elements basic design parameters in the most of entire standard size range and technical secondary transducer capabilities is considered in the article. The results of the experiments conducted by the authors and the results of the authors experimental studies listed in the references have confirmed the adequacy of theoretical methods for calculating the parameters of elastic elements for pressure sensors.


Atslēgas vārdi
Aerometric Pressure Sensors; Elastic Sensing Element; Incident Air Flow Pressure; Linear CCD
DOI
10.15866/ireme.v16i1.21118
Hipersaite
https://www.praiseworthyprize.org/jsm/index.php?journal=ireme&page=article&op=view&path[]=26017

Borisov, R., Antonec, I., Krotov, A., Tarasov, S., Bobrovs, V. Methodology for the Static and Total Pressure Sensor Development Based on Elastic Sensing Elements and Linear CCD Matrices. International Review of Mechanical Engineering, 2022, Vol. 16, No. 1, 29.-39.lpp. ISSN 1970-8734. e-ISSN 2532-5655. Pieejams: doi:10.15866/ireme.v16i1.21118

Publikācijas valoda
English (en)
RTU Zinātniskā bibliotēka.
E-pasts: uzzinas@rtu.lv; Tālr: +371 28399196