Surface Finishing of Additive Manufacturing Parts for Particle Accelerators
Proceedings of the 32nd Linear Accelerator Conference (LINAC2024) 2024
Hendrik Hahnel, Dedic Benjamin, Andris Ratkus, Tobia Romano, Cristian Pira, Roberta Caforio, Eduard Chyhyrynets, Matteo Pozzi, Maurizio Vedani, Maurizio Vretenar, Toms Torims, Natalie Kunkel

Significant progress towards the suitability of Additive Manufacturing (AM) metal parts for the production of linear accelerator components has been made in recent years. One significant factor for the suitability of AM parts to produce linac rf structures is the surface quality of the parts. Due to the inherently higher surface roughness of AM metal parts, post-processing is necessary to reach surfaces suitable for rf operation. We present most recent results of surface post-processing trials with AM parts from stainless steel.


Atslēgas vārdi
additive manufacturing | surface finishing | particle accelerators
DOI
10.18429/JACoW-LINAC2024-TUPB020
Hipersaite
https://www-scopus-com.resursi.rtu.lv/record/display.uri?eid=2-s2.0-85212873635&origin=resultslist

Hahnel, H., Benjamin, D., Ratkus, A., Romano, T., Pira, C., Caforio, R., Chyhyrynets, E., Pozzi, M., Vedani, M., Vretenar, M., Torims, T., Kunkel, N. Surface Finishing of Additive Manufacturing Parts for Particle Accelerators. No: Proceedings of the 32nd Linear Accelerator Conference (LINAC2024), Amerikas savienotās valstis, Čikāga, 25.-30. augusts, 2024. Geneva: JACoW, 2024, 359.-362.lpp. ISBN 978-3-95450-219-6. ISSN 2226-0366. Pieejams: doi:10.18429/JACoW-LINAC2024-TUPB020

Publikācijas valoda
English (en)
RTU Zinātniskā bibliotēka.
E-pasts: uzzinas@rtu.lv; Tālr: +371 28399196