Sintering of Amorphous Calcium Phosphate to Near-Full Density by Uniaxial Compaction at Room Temperature
Journal of the European Ceramic Society
2022
Kristaps Rubenis,
Signe Sperga,
Jana Vecstaudža,
Kristīne Lazdoviča,
Juris Bitenieks,
Piotr Wiecinski,
Abhishek Rajesh Indurkar,
Jānis Ločs
Amorphous calcium phosphate is a metastable phase with excellent biocompatibility and resorbability. Despite these characteristics, its use is currently limited to the powder and coating forms; only moderate success has been achieved in its densification, which has prevented its use in the bulk form. Here, we show that amorphous calcium phosphate can be sintered to near full density by simple uniaxial die pressing at 1250–1500 MPa at room temperature. The relative densities of the samples that were compacted at 1250 and 1500 MPa exceeded 95 %. Their specific surface area was more than 1000 times smaller than that of the starting powder and their Vickers hardness exceeded 1.90 GPa. The microstructures of the samples consisted of a grain-like structure with grain sizes below 100 nm. These results could inspire new applications for amorphous calcium phosphate in the form of bulk ceramics.
Atslēgas vārdi
Amorphous calcium phosphateBioceramicsUniaxial die pressingCold sinteringNear-full density
DOI
10.1016/j.jeurceramsoc.2022.06.041
Hipersaite
https://www.sciencedirect.com/science/article/pii/S0955221922004927?via%3Dihub
Rubenis, K., Zemjāne, S., Vecstaudža, J., Lazdoviča, K., Bitenieks, J., Wiecinski, P., Indurkar, A., Ločs, J. Sintering of Amorphous Calcium Phosphate to Near-Full Density by Uniaxial Compaction at Room Temperature. Journal of the European Ceramic Society, 2022, Vol. 42, No. 13, 6199.-6205.lpp. ISSN 0955-2219. Pieejams: doi:10.1016/j.jeurceramsoc.2022.06.041
Publikācijas valoda
English (en)